1-20ton Ladle Refining Furnace
Product details
Structure characteristics: ladle furnace with LD, VD, VOD, AOD four kinds type of furnace, the user can choose according to the type of furnace or boiler type combination steel and smelting process production.
As the refining equipment arc furnace, converter, induction furnace refining furnace with initial refining furnace.
With arc heating, argon stirring, vacuum degassing, temperature and sample alloying and other functions.
Equipment composition
| 1. | Ladle |
| 2. | Ladle and towing device |
| 3. | The heating tray and a roller device |
| 4. | Heating furnace cover and lifting device |
| 5. | Electrode lifting mechanism |
| 6. | Electric furnace transformer |
| 7. | Busbar |
| 8. | Argon blowing system |
| 9. | Cooling system |
| 10. | Hydraulic system |
| 11. | Low voltage electrical control system |
Parameter
| Main Technical Parameter | | |
| Ladle rated capacity | 50T | |
| Free board | 600mm(for 40 tons molten steel) | |
| Ladle car travel speed | 2-20m/min | |
| Ladle car driving method | Mechanical, VVVF | |
| Ladle car position accuracy | ±10mm | |
| Roof construction | Water cooled ,tubular | |
| Roof lifting distance | 400mm | |
| Electrode diameter | 350mm | |
| Pitch circle diameter | 600mm | |
| Electrode lifting distance | 2200mm | |
| Electrode travel speed | 4m/min(up, automatic) 3m/min(down, automatic) | |
| Temperature rising rate | ≥4℃ max 5℃ after heat balance | |
| Transformer capacity | 10MVA+20% | |
| Primary voltage | 22KV, 3 P, 50Hz | |
| Number of taps and voltage steps | 5 (off-load) | |
| Cooling mode | OFWF | |
| Short net Impedance | ≤2.4mΩ | |
| Three phase unbalance | ≤4% | |
| Hydraulic pressure | 12MPa | |
| Hydraulic medium | Water-glycol | |
| Water pressure | 0.5MPa (for roof cooling) 0.3MPa(for the other) | |
| Inlet water temperature | ≤35℃ | |
| Outlet water temperature | ≤55℃ | |
| Total water consumption | 250m3/h | |
| Compressed air pressure | 0.4-0.6Mpa | |
| Compressed air flow rate | 120L/min | |
| Argon gas pressure | 0.8Mpa (max 1.6Mpa) | |
| Argon flow rate | 250L/min(max) | |
Function
1. Electric arc heats up and temperature rises under constant pressure, measure temperature and take samples, finally temperature control is accurate so as to optimize casting temperature.
2. Synthetic slag goes through refining, desulfuration, deoxidation, degasification and removal of inclusions
3. Bottom blowing argon siring. make liquid steel temperature uniform and make components uniform and pure.
4. Alloy fine adjustment makes component controlled accurately. The finally required chemical composition could be achieved with high efficiency through ferroalloy element or aluminum or wire feeding.
5. Being equipped with wire feeder makes liquid steel realize desulfuration and deoxygenation, changes inclusion pattern and distribution and accurately controls alloy elements. And it has high alloy yield, low temperature drop and low environmental pollution.
6. As buffering equipments between primary melting furnace and continuous casting machine, ensure matching production of primary meting furnace and continuous casting, realize sequence casting.
Characteristics
1. Adopting the water cooled furnace roof equipped with dedusting interface of which the size of smoke outlet is adjustable to keep the tiny barotropic atmosphere and reducing atmosphere inside the furnace.
2. Using the cooper-steel composited conductive arm, reducing electrode pitch circle diameter and prolonging lining service life.
3. Equipped with automatic or manual temperature measurement and sampling device to measure the liquid steel temperature accurately.
4. Large current system adopts large-section water cooled cable, compensators and copper-steel composite conducive arm, thus reduce major loop impedance.
5. Using alloy and slag automatic charging device to accurately measure the charging volume.
6. Equipped with PLC control system and smelting model.
Selling Units: Single item
Single package size: 150*100*170cm
Single gross weight: 100,000kg
Package Type: Safety Seaworthy Package
Lead Time:
| Quantity (Tons) | 1-100 | >100 |
| Est. Time(Days) | 60 | To be negotiated |
Product Tags:
|
|
ISO 9001 Variable Power 20 Ton LRF In Steel Making Images
|
